Power Indicator/Eizo Logo Display Setting; To Turn Off The Power Indicator While A Screen Is Displayed [Power Indicator Setting]; To Display Eizo Logo [Eizo Logo Appearing Function]; Beeper Settings - Eizo FlexScan S2111W User Manual

2-6 Power Indicator/EIZO Logo Display
Setting
●
To turn off the Power indicator while a screen is displayed

[Power Indicator Setting]

This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Power Indicator> from the <Others> menu, and touch
The <Power Indicator> menu appears.
(3) Select "Disable" with
The Power Indicator setting is completed.
●

To display EIZO logo [EIZO Logo Appearing Function]

When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Touch to power off the unit.
(2) Touch again while touching
The EIZO logo does not appear on the screen.
[Resetting]
(1) Touch to power off the unit.
(2) Touch again while touching
The logo appears again.

2-7 Beeper Settings

●

To set the beeper [Beep]

Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type
Short beep
Long beep
Consecutive beeps
Beep-beep once every 15
seconds
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Beep> from the <Others> menu, and touch
The <beep> menu appears.
(3) Select On or Off with
The beep setting is completed.
20
Chapter 2 Settings and Adjustments
or , and touch .
.
.
Conditions for beeping
• When an item is selected with
• When a maximum or minimum value is set with
the control switches
• When is touched.
• When is touched.
• When registration is performed with
• When the monitor is not connected correctly
• When the PC is not turned on
• When a frequency out of the specifi ed range is
received
• 15 minutes before the power off time set by "Off
Timer" (advance notice time)
or , and touch .
NOTE
• The Power indicator lights up at
power on with the default setting.
.
.
NOTE
• The logo appears with the default
setting.
.
.