Chapter  Connecting Cables; Connecting Two Pcs To The Monitor; To Switch The Input Signal - Eizo FLEXSCAN S2232W User Manual

Chapter  Connecting Cables
-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
To PC 1
DVI-D connector
Signal cable
(supplied FD-C39)
●
To switch the input signal
The input signal switches each time
When the signal is switched, the active input port name appears at the top right
corner of the screen.
8
Chapter 3 Connecting Cables
D-Sub mini
15-pin Connector
DVI-D connector
Digital Analog
Signal cable
(supplied MD-C87)
is pressed.
To PC 2
D-Sub mini
15-pin Connector