Eizo FlexScan S2111W User Manual page 14

4
Perform advanced adjustments for the following using the
<Screen> menu of the Adjustment menu.
●
To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and touch
The <Clock> menu appears.
(2) Adjust the clock with
The adjustment is completed.
●
To remove fl ickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and touch
The <Phase> menu appears.
(2) Adjust the phase with
The adjustment is completed.
●
To correct screen position [Position]
Since the number of pixels and the pixel positions are fi xed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and touch
The <Position> menu appears.
(2) Adjust the position with
properly in the display area of the monitor.
12
Chapter 2 Settings and Adjustments
or , and touch .
or , and touch .
/ / / to display the image
NOTE
• Touch the control button slowly so as
not to miss the adjustment point.
• When blurring, fl ickering or bars
appear on the screen after adjustment,
.
proceed to [Phase] to remove
fl ickering or blurring.
Attention
• Flickering or blurring may not be
.
eliminated depending on your PC or
graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
"To eliminate vertical bars [Clock]."
(Clock → Phase → Position)
.