Table of Contents
Advertisement
Quick Links
Important
Please read this User's Manual and Setup
Manual (separate volume) carefully to
familiarize yourself with safe and effective
usage.
PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Setting
2-7 Locking Buttons
2-8 Setting Adjustment menu Display
2-9 Viewing Information/Setting Language
2-10 Setting BrightRegulator
2-11 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
3-2 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm (Option)
5-2 Cleaning
5-3 Specifi cations
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
Advertisement
Table of Contents
Related Manuals for Eizo EIZO FlexScan S2100-M
Summary of Contents for Eizo EIZO FlexScan S2100-M
- Page 1 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Setting Adjustment menu Display 2-9 Viewing Information/Setting Language 2-10 Setting BrightRegulator 2-11 Resumption of Default Setting...
-
Page 2: Safety Symbols
EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information... -
Page 3: Precautions
PRECAUTIONS IMPORTANT • This product has been adjusted specifi cally for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specifi ed in the specifi cations. •... - Page 4 WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
- Page 5 WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fi re or electric shock.
- Page 6 CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit fi rmly with both hands ensuring the panel faces outward before lifting.
-
Page 7: Lcd Panel
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. -
Page 8: Table Of Contents
To turn off the Power indicator while a screen is displayed [Power Indicator Setting] ... 18 ● To display EIZO logo [EIZO Logo Appearing Function] ... 18 CONTENTS Locking Buttons ... 18 ● To lock operation [Adjustment Lock] ... 18 Setting Adjustment menu Display ... -
Page 9: Chapter 1 Features And Overview
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-I and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24 - 80 kHz, Digital: 31 - 76 kHz •... -
Page 10: Functions And Basic Operation
1-3 Functions and Basic Operation To adjust the screen and color • The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time. CAL Switch mode Color Adjustment Simple Adjustment [CAL Switch mode] This function allows easy selection of a desired mode from fi... -
Page 11: Basic Operation Of Adjustment Menu
Locking Adjustment ● [Adjustment Lock] to lock operation of the monitor EIZO Logo Display Setting ● [EIZO Logo Appearing Function] to display or not to display the EIZO logo Connecting Cables ● 3-1 Connecting Two PCs to the Monitor ●... -
Page 12: Chapter 2 Settings And Adjustments
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. -
Page 13: Screen Adjustment
• Advaced Adjustment Run the Screen Adjustment Program. Load the EIZO LCD Utility Disk on the PC, and start the Screen Adjustment Program compatible with the PC in use. After the program starts up, perform the adjustment in step 4 following the instructions of the program. -
Page 14: [Clock] To Remove Vertical Bars
Perform advanced adjustments for the following using the <Screen> menu of the Adjustment menu. ● To eliminate vertical bars [Clock] (1) Choose <Clock> from the <Screen> menu, and press The <Clock> menu appears. (2) Adjust the clock with The adjustment is completed. ●... -
Page 15: [Range Adjustment] To Adjust Color Gradation Automatically
Adjust the signal output range ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose <Range Adjustment> from the <Screen> menu, and press A message “Your setting will be lost it you press AUTO button” appears. (2) Press while the message is displayed. -
Page 16: Color Adjustment
2-3 Color Adjustment Simple adjustment [CAL Switch mode] This function allows you to select the best display mode for monitor brightness, etc. ● CAL Switch Mode An appropriate display mode is selectable out of fi ve modes. Mode Custom Available for making desired setting. Suitable for color matching with sRGB compatible sRGB peripherals. -
Page 17: Advanced Adjustments [Adjustment Menu]
Advanced Adjustments [Adjustment menu] Independent setting and saving of color adjustment are available for each CAL Switch mode. ● To select an appropriate mode for images ✓ : Adjustment/setting available −: Factory setting Icon Function Custom ✓ Brightness ✓ Temperature ✓... -
Page 18: To Set/Adjust Color
Menu Description Gain To adjust red, green, and blue to a desired color tone respectively NOTE • Values shown in percentage are available only as reference. • The <Temperature> setting invalidates this setting. The <Gain> setting returns to the default setting. Reset To reset the color settings of the selected CAL... -
Page 19: Screen Size Selection
2-5 Screen Size Selection ● To change screen size [Screen Size] This function allows you to change the screen size when a low-resolution image is displayed. Menu Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. -
Page 20: Power Indicator/Eizo Logo Display Setting
● To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. [Procedure] (1) Press to power off the unit. -
Page 21: Setting Adjustment Menu Display
2-8 Setting Adjustment menu Display ● To update menu settings [Menu Size/Menu Position/ Menu Off Timer/Translucent/Orientation] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Menu Settings> from the <Others> menu, and press (3) Choose <Menu Size>... -
Page 22: Viewing Information/Setting Language
2-9 Viewing Information/Setting Language ● To check settings, usage time, etc. [Information] This function allows you to check settings, model name, serial number, and usage time of the monitor. (1) Choose <Information> from the Adjustment menu, and press The <Information> menu appears. (2) Then, press to check settings, etc. -
Page 23: Chapter 3 Connecting Cables
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples DIV-I connector (SIGNAL1) PC 1 Signal cable (supplied with... -
Page 24: To Set Auto-Switching Of Input Signals [Input Signal]
(1) A PC equipped with a USB port or another USB hub connected to a USB compatible PC (2) Windows 98/Me/2000/XP or Mac OS 8.5.1 or later (3) Supplied EIZO USB cable (MD-C93) ● Connection Procedure (Setup of USB Function) (1) Connect the monitor fi... -
Page 25: Chapter 4 Troubleshooting
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems → See No.1 - No.2. • Imaging problems → See No.3 - No.11. • Other problems → See No.12 - No.17. Problems No picture •... - Page 26 Problems The screen is too bright or too dark. Afterimages appear. 10. Green/red/blue/white dots or defective dots remain on the screen. 11. Interference patterns or fi ngerprints remain on the screen. 12. Noise appears on the screen. 13. The [Smoothing] icon on the Adjustment menu [Screen] cannot be selected.
-
Page 27: Chapter 5 Reference
5-1 Attaching an Arm (Option) The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. -
Page 28: Cleaning
5-2 Cleaning Clean the monitor periodically to keep the monitor clean and extend its life. Cabinet Clean the cabinet with a soft cloth dampened with little mild detergent. LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. -
Page 29: Specifi Cations
5-3 Specifi cations LCD Panel 21.3-inch (540 mm) TFT color LCD with anti-glare hard coating Viewing angle: Vertical 178°, Horizontal 178° (CR: 10 or more) Dot Pitch 0.270 mm Horizontal Scan Frequency Analog: 24 - 80 kHz (Automatic) Digital: 31 - 76 kHz Vertical Scan Frequency Analog: 49 - 76 Hz (Automatic) (1600 ×... - Page 30 Main default settings (factory settings) BrightRegulator Smoothing CAL Switch Mode Screen Size Input Signal Off Timer Setting Language Outside Dimensions Chapter 5 Reference Disabled Custom Full Auto Disabled Size Normal Off Timer 45 seconds English unit : mm (inch)
-
Page 31: Glossary
fi lter. Pin No. Signal Red ground Green ground Blue ground Ground Remarks Cable power Serial data Serial data Cable ground EIZO ScreenCleaner Pin No. Signal (Short-circuited to pin 10) Data (SDA) H. Sync V. Sync Clock (SCL) Chapter 5 Reference... - Page 32 Resolution The LCD panel consists of numerous pixels of specifi ed size, which are illuminated to form images. The EIZO S2100-M monitor consists of 1600 horizontal pixels and 1200 vertical pixels. At a resolution of 1600 × 1200, all pixels are illuminated as a full screen (1:1).
-
Page 33: Preset Timing
5-5 Preset Timing The following table shows factory preset video timing. Chapter 5 Reference... - Page 34 Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
-
Page 35: Fcc Declaration Of Conformity
Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specifi ed cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord... - Page 36 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen: Der Standfuß...
- Page 37 Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00.