Connect The Power Cord; Set The Lcd Contrast - Brother DCP-7060D Quick Setup Manual

4

Connect the power cord

IMPORTANT
DO NOT connect the interface
cable yet.
a
Connect the AC power cord to the machine,
and then plug it into an AC power outlet.
b
Turn on the machine's power switch.
5
Choose your language
(if needed)
a
Press Menu.
b
Press a or b to choose 1.General Setup.
Press OK.
c
Press a or b to choose 0.Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
6
6

Set the LCD contrast

(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose 1.General Setup.
Press OK.
c
Press a or b to choose 3.LCD Contrast.
Press OK.
d
Press a to increase the contrast.
—OR—
Press b to decrease the contrast.
Press OK.
e
Press Stop/Exit.