Brother DCP-7060D Quick Setup Manual page 15

Wired Network
Note
• You can find your machine's MAC Address
(Ethernet Address) and IP Address by printing
out the Network Configuration Report. See Print
the Network Configuration Report on page 16.
• If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and
click OK. Go to d.
• If you want to use the machine's SCAN key to
scan over the network, you must check the
Register your computer with the "Scan To"
function on the machine box.
• The name you enter will appear on the
machine's LCD when you press
and choose a scan option. (For more
information, see Network Scanning in the
Software User's Guide.)
d
When this screen appears, click Next.
The installation of MFL-Pro Suite is now
complete.
Go to step 10 on page 15.
10
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
On the Brother Support screen, click
Presto! PageManager and follow the on-screen
instructions.
11
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 9 on page 14.
(SCAN)
Finish
Note
If you use a specified IP Address for the machine,
you must set the Boot Method to Static by using
the control panel. For more information, see
Network menu in the Network User's Guide.
Macintosh
Download and install
Presto! PageManager
Install MFL-Pro Suite on
additional computers
(if needed)
The installation is now
complete.
15