[ 9 ]
Reassembling the Bottom Cover
(1)
Turn the machine over.
(2)
Assemble the bottom cover with twelve screws.
Bottom cover
(3)
Connect the battery connector to the connector of the bottom cover and contain the battery
in the machine (PT-9600 only).
(4)
Fit the battery lid "A" to the slits of the bottom cover in three places and push the battery lid
until the "B" can be nipped (PT-9600 only).
Note: Exchange the cushions of the battery lid if those are broken (PT-9600 only).
(5)
Turn the machine up.
Bottom cover
Hole
Screws
Fig. 3.2-42 Reassembling the Bottom Cover (1)
Battery lid
"A"
Battery
Fig. 3.2-43 Reassembling the Bottom Cover (2)
Hook
"B"
Hook
III-55
Screws
Cushion
Battery lid