Brother PT-9600 Service Manual page 105

(5) Press the "RET" key. The display shifts to one as shown in Fig.37.
(6) Press the "RET" key. The display shifts to one as shown in Fig.38.
Note 3: Here, if returns to the display as shown in Fig.35, restart from the step (2).
(7) Press the "RET" key while the LCD displays as shown in Fig.38. The display shifts to
the Avery Print Mode as shown in Fig.39.
2.11. Avery Print Mode ( " 9 " key )
This mode verifies the start position of printing area of the print sample of the avery cassette.
Note 1: This mode is used only for PT-9600 and PT-3600 (U.S.A. version).
Note 2: Make sure to use an address labels cassette. Do not use any types of cassettes
other than the avery cassette.
(1) Press the "RET" key. The display shifts to one as shown in Fig.40.
(2) Set the address labels cassette to the machine and close the cassette cover.
(3) Press the "RET" key. The machine starts to print.
5±1.5mm
Fig. 37
Fig. 38
Fig. 39
Fig. 40
56.7±2.8mm
Print Sample 2
III-71