Brother PT-9600 Service Manual page 64

(5) Reassemble the release button spring into the release button.
Note: Apply the silicon grease (Shin-Etsu Chemical brand G501) by a half rice-grain sized
drop per centimeter to full around the stem and the stem head of the release button.
Release button spring
Release button
(6) Reassemble the release button on the body cover.
Note: Make sure to secure the hooks of the release button in four places of the body cover.
Body cover
Fig. 3.2-3 Reassembling the Release Button (1)
Hooks
Fig. 3.2-4 Reassembling the Release Button (2)
III-30
Apply grease.
Hooks
Release button