Reassembling The Upper Cover And The Under Cover - Brother P-touch QL-710W Service Manual

[10] Reassembling the Upper Cover and the Under Cover

(1) Insert the tape sensor PCB ASSY into the insert guide.
NOTE 1: Insert the tape sensor PCB ASSY until it hits the groove of the insert
guide.
NOTE 2: Confirm that you can see the tape sensor PCB ASSY from the hold of
the insert guide.
NOTE 3: Fold the flat cable after assembling the tape sensor PCB ASSY.
Insert guide
Tape sensor PCB ASSY
Groove
Fig. 3.5-29 Reassembling the Upper Cover and the Under Cover (1)
Insert guide
Groove
Flat cable of
the tape sensor PCB ASSY
III - 48
Tape sensor PCB ASSY