3 ] Reassembling The Main Pcb - Brother PT-9600 Service Manual

[ 3 ] Reassembling the Main PCB
(1) Fit the shield plate D on the two pins of the bottom cover.
(2) Assemble the sheet A on the bottom cover.
Sheet A
Shield plate D
Pin
Bottom cover
(3) First, insert the serial connector (PT-9600 only) and the USB connector to the slots of the
bottom cover. Then secure the main PCB on the bottom cover with five screws.
Main PCB
Bottom cover
Fig. 3.2-10 Reassembling the Main PCB (1)
Screws
Fig. 3.2-11 Reassembling the Main PCB (2)
Pin
III-35
Screws
Serial connector
(PT-9600 only)
USB connector