Speakers - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual

Speakers

Description
For use in computers with 15-in displays
For use in computers with 14-in displays
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the speakers:
1. Position the computer right-side up with the front toward you.
2. Disconnect the speaker cable (1) from the system board.
NOTE:
3. Remove the four Phillips PM2.5×3.0 screws (2) that secure the speakers to the top cover.
4. Remove the speaker cable from the clips and routing channel, and then remove the speakers from
the computer (3).
Reverse this procedure to install the speakers.
Battery on page
The two speakers are connected with a single cable.
63).
Switch cover and keyboard on page
Component replacement procedures
Spare part number
536598-001
536420-001
64).
73