Bluetooth Module; Hard Drive; Top Cover - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 536539-001 for computers with 15-in
displays, 536538-001 for computers with 14-in displays. See
spare part number information.
Description
HP Integrated Bluetooth 2.0 module for use in all countries and regions except Japan and Asia
Pacific countries and regions
HP Integrated Bluetooth 2.1 module for use in all countries and regions except Japan and Asia
Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
Remove the Bluetooth module:
1. Position the computer right-side up with the front toward you.
2. Disconnect the Bluetooth module cable (1) from the system board.
3. Remove the Bluetooth module cable (2) from the routing path.
102 Chapter 4 Removal and replacement procedures
Battery on page
Switch cover and keyboard (see
Top cover (see Top cover on page
Palm rest (see Palm rest on page
Hard drive (see Hard drive on page
Cable Kit on page 45
63).
Switch cover and keyboard on page
90)
75)
78)
for more Cable Kit
Spare part number
483113-001
537921-001
64)