Power Button Board - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual

Power button board

Description
Power button board for use in computers with 15-in displays (includes cable)
Power button board for use in computers with 14-in displays (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
Remove the power button board:
1. Position the top cover upside-down with the rear toward you.
94 Chapter 4 Removal and replacement procedures
Battery on page
Switch cover and keyboard (see
Optical drive (see Optical drive on page
Speakers (see Speakers on page
Palm rest (see Palm rest on page
Hard drive (see Hard drive on page
Top cover (see Top cover on page
Display assembly (see
Display assembly on computers with 14-in displays on page
63).
Switch cover and keyboard on page
69)
73)
75)
78)
90)
Display assembly on computers with 15-in displays on page 84
Spare part number
574513-001
574514-001
64)
97)
or