HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual page 101

8. If it is necessary to replace the display/webcam cable, turn the display panel upside-down and peel
back the tape that secures the display cable to the display panel (1), and then disconnect the cable
from the connector on the back of the display panel (2).
NOTE: The display cable and webcam cable are bound together as one cable assembly.
9. Gently pull the webcam cable (1) from the clips and routing channels (2) built into the top cover.
The display/webcam cable is included in the Display Cable Kit, spare part number 536433-001 for
computers with 15-in displays.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures 89