HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual page 79
Service guide
Hide thumbs
Also See for 4510s - ProBook - Celeron 1.8 GHz:
- User manual (48 pages) ,
- Specification (37 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
6.
Slide the keyboard back toward the display (1), and then rotate it forward (2) until it rests upside-
down on the palm rest.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
disconnect the keyboard cable (2) from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the switch cover and keyboard.
Component replacement procedures
67
Advertisement
Chapters
Table of Contents
