Computer Setup In Linux; Starting Computer Setup - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual
Service guide
Hide thumbs
Also See for 4510s - ProBook - Celeron 1.8 GHz:
- User manual (48 pages) ,
- Specification (37 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Computer Setup in Linux
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system
is not working or will not load.
NOTE:
Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE:
Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate
and make selections.
NOTE:
An external keyboard connected by USB can be used with Computer Setup only if USB legacy
support is enabled.
To start Computer Setup, follow these steps:
1.
Turn on or restart the computer.
2.
Before your operating system opens and while the "F10=ROM Based Setup" message is displayed
in the lower-left corner of the screen, press f10.
Computer Setup in Linux 123
Advertisement
Chapters
Table of Contents
