Printing A Single Copy; Printing Multiple Copies - Brother P-Touch PT-2730 User Manual

Printing a Single Copy

1
Make sure that the appropriate tape cassette is inserted and ready for printing.
2
Press the Print key. "Printing...Copies" is displayed
while the labels are being printed.
To stop printing, press the Power key to turn off the P-touch labeler.
There are several other messages that may appear when you press the Print key. Refer to "Error
Messages" on page 74 for further information about error messages.

Printing Multiple Copies

Using this function you can print up to 99 copies of the same label.
1
Make sure that the appropriate tape cassette is inserted and ready for printing.
2
Hold down the Shift key and press the Print key to display the print options
screen, and then select "Copies" using the
3
Press the OK or Enter key to display the Copies screen, and then select the
number of copies to be printed using the
the number keys.
Hold down the
4
Press the OK or Enter key. "Printing...Copies" is
displayed while the labels are being printed.
• Press the Escape key to return to the previous step.
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape
Cutting Options" on page 57 to change this setting.
• The figures shown on the screen during printing indicate the "count / number of copies set".
• Pressing the Space key when setting the number of copies resets the value to 1, the default.
or key to change the number of copies faster.
or key.
or key, or type the number using
1
2
3
4
5
6
7
8
9
54
Printing a Label