Brother P-Touch PT-2730 User Manual page 84

TROUBLESHOOTING
Message
Check # of
Digits
Entered! *
Input A,B,C or D
At Start&End! *
Maximum Of
5 Bar Codes
Per Label! *
Category Full! *
Installed tape is
not compatible with
this machine! *
*Press any key to clear the error message.
77
Error Messages
The number of digits entered in the bar code data does not
match the number of digits set in the bar code parameters.
Enter the correct number of digits.
The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the bar code data for the CODABAR protocol). Enter the bar
code data correctly.
There are already 5 bar codes entered in the text data when
you try to enter a new bar code. You can only use up to five
bar codes in each label.
The memory available for categories is full.
To make more memory available, delete any unnecessary
registered categories by highlighting the category and
pressing the Clear key.
Tape that is incompatible with the machine has been
installed. Use compatible tape.
Cause/Remedy