Ac Adapter - Brother P-Touch PT-2730 User Manual

GETTING STARTED

AC Adapter

Connect the AC adapter directly to the P-touch labeler.
1
Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V
on the P-touch labeler.
2
Insert the AC adapter plug into a standard electrical outlet.
• Turn the P-touch labeler off before disconnecting the AC adapter.
• Do not pull or bend the AC adapter cord.
To safeguard and backup the labeler's memory and clock setting, when the AC adapter is
unplugged it is recommended to have AA-size alkaline batteries (LR6) installed into the
machine.
• Use only the adapter, which is designed exclusively for your P-touch. Failure to observe
this may result in an accident or damage. Brother shall not assume any responsibility for
any accident or damage resulting from not using the specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this
may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using a standard electrical outlet.
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend
to use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings will
be cleared. Any text files stored in the memory will also be cleared.
17 Power Supply
WARNING
CAUTION