E-Mail Alerts - Hitachi CP-X2 - XGA LCD Projector User Manual

4. Utilize projector – Advanced -

4.4 E-mail Alerts

The projector can send an alert message to the specified e-mail addresses when
the projector detects a certain condition that is requiring maintenance or detected
an error.
NOTE
• Up to five e-mail addresses can be specified.
• The projector may be not able to send e-mail if the projector suddenly loses
power.
Mail Settings (26)
To use the projector's e-mail alert function, please configure the following items
through a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter [http://192.168.1.10/] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click [Logon].
3) Click [Port Settings] on the main menu.
4) Click the [Enable] check box to open the SMTP port.
5) Click the [Apply] button to save the settings.
6) Click [Mail Settings] and configure each item. Refer to the [Mail Settings]
item in "Configuring and controlling the Projector via a Web Browser" for
further information.
7) Click the [Apply] button to save the settings.
NOTE
• Click the [Send Test Mail] button in [Mail Settings] to confirm
that the e-mail settings are correct. The following mail will be delivered to the
specified addresses.
Subject line : Test Mail
Text : Send Test Mail
Date
Time
IP Address
MAC Address
66
<Projector name>
<Testing date>
<Testing time>
<Projector IP address>
<Projector MAC address>