Hitachi CP-X2 - XGA LCD Projector User Manual page 74

Network functions

Hide thumbs Also See for CP-X2 - XGA LCD Projector:

Table of Contents

4. Utilize projector – Advanced -

4.8 Command Control via the Network (Continued)

Command Control Settings (Continued)

When the authentication setting is enabled, the following settings are required.

(33)

7) Click [Security Settings] on the main menu.

8) Click [Network Control] and enter the desired authentication password. * See

NOTE.

9) Click the [Apply] button to save the settings.

NOTE

• The Authentication Password will be the same for [Network Control

Port1 (Port: 23)], [Network Control Port2 (Port: 9715)].

Regarding the command details (format and protocol), please see the User's

Manual - Technical.

Table of Contents

Cpx2 Cpx6