Alert Settings - Hitachi CP-X2 - XGA LCD Projector User Manual

2.5 Configuring and controlling the projector via a web browser (Continued)

2.5.5 Alert Settings

Displays and configures failure & warning alerts.
Alert Item
Cover Error
Fan Error
Lamp Error
Temp Error
Air Flow Error
Lamp Time Error
Cold Error
Filter Error
Other Error
Schedule Execution
Error
Lamp Time Alarm
Filter Time Alarm
Transition Detector
Alarm
"CHANGE THE LAMP" is
displayed.
Cold Start
Authentication Failure
Refer to "User's Manual – Troubleshooting" for further detailed explanation of Error
except Other Error and Schedule Execution Error.
2. Equipment connection and network setting
The lamp cover has not been properly fixed.
The cooling fan is not operating.
The lamp does not light, and there is a possibility that interior
portion has become heated.
There is a possibility that the interior portion has become
heated.
The internal temperature is rising.
Lamp time over.
There is a possibility that the interior portion has become
overcooled.
Filter time over.
Other error.
If displaying this error, please contact your dealer.
Schedule Execution error. (29)
Lamp time over Alarm Time setting.
Filter time over Alarm Time setting.
Transition Detector Alarm. (OPTION Menu of the User's
Manual - Operating Guide)
"CHANGE THE LAMP" is displayed.
The main power switch has been turned on.
(Off → standby mode)
The SNMP access is detected from the invalid SNMP
community.
Description