Full Screen Mode - Hitachi CP-X2 - XGA LCD Projector User Manual

4.2 Utilize "PC-LESS Presentation" – Advanced - (Continued)

4.2.2 Full Screen Mode

Full Screen Mode (Fig.4.2.2) shows a full display image. To make full screen
display, press the ENTER button on remote control or the INPUT button on
Keypad or click [ENTER] button in the Web Remote Control if the image file is
selected on Thumbnail Mode or Directory Tree View.
While displaying in full screen, following operation can be accessible from the
Web Remote Control.
◄/►
or
▲/▼
(Selected on KEY
CONFIG. MENU 58)
ENTER Remote control
INPUT Keypad
MENU Remote control
* These operations are not accessible while projector OSD menu is displayed.
NOTE
• It is not possible to change the input port by INPUT button of keypad
when displaying the THUMBNAIL, SLIDE SHOW, or DIRECTORY.
• Display the projector OSD Menu before changing the input port.
• Image might not be displayed properly at the beginning or end of MP4 file
playback.
Fig.4.2.2 Full Screen Mode
• Rotates image 90 degrees clockwise or otherwise. Once image
is rotated, it keeps the display image even though it is switched.
(Thumbnail or Slide Show Mode) To return the original, rotate the
image 360 degrees or erase playlist in memory card. (65)
• Moves the slide forward or backward.
(from Thumbnail Mode) Displays thumbnail.
Displays PC-LESS PRESENTATION Menu.
4. Utilize projector – Advanced -
Full screen display
57