Utilize "Miu Live Viewer" - Basic - Hitachi CP-X2 - XGA LCD Projector User Manual

3.1 How to use "MIU Live Viewer" (Continued)
3.1.4 Utilize "MIU Live Viewer" – Basic -
This section explains basic of how to use "MIU Live Viewer" functions.
• Before start up the "MIU Live Viewer", you have to set the projector into LIVE
MODE by either of following way.
1) from Web Remote Control
(1) Click [LIVE MODE] button.
2) from OSD Menu
(1) Open the OSD menu by pressing ▲/▼/◄/► Keypad button on the projector
or MENU button on remote control.
(2) Select the MIU menu by remote control or Keypad.
(3) Select the LIVE MODE in MIU Menu, and press the ► button on Keypad on
the projector or ENTER button on remote control.
• After setting to the projector into LIVE MODE.
1) Start "MIU Live Viewer". If "MIU Live Viewer" installation is not completed,
install it referring to 3.1.1 Install "MIU Live Viewer".
Fig. 3.1.4.a Screen after "MIU Live Viewer" starting up
3. How to use Projector software – Basics -
47