Manual Network Connection Setting – Wired Lan; Equipments Connection - Hitachi CP-X2 - XGA LCD Projector User Manual

Network functions

Hide thumbs Also See for CP-X2 - XGA LCD Projector:

Table of Contents

2. Equipment connection and network setting

2.2 Network connection using "One-Click-Communication" function

(Continued)

4) Click [One-Click] button in Fig. 2.2.a, then projector will be found. And the

capture start button

automatically.

[Wireless LAN connection]

1) When projector network settings such as IP address and subnet mask are

changed, need to return to the projector factory default settings. (8)

2) In case IEEE802.11b/g wireless LAN device is built-in the PC, make the LAN

valid and other network connections invalid. If wireless LAN device is not built

in the PC, connect IEEE802.11b/g wireless LAN device and install device driver

to the PC. (Refer to the user guide for wireless LAN device details.)

3) Start up "MIU Live Viewer", then the window appears (Fig. 2.2.a).

4) Click [One-Click] button in Fig. 2.2.a, then projector will be found. And the

capture start button

automatically.

2.3 Manual network connection setting – Wired LAN -

When you need to set the original IP address and SSID other than factory default

settings, need to set up network connection manually.

This section explains how to set up network connection manually.

At first, connect projector and PC with wired LAN connection to check PC setting

and connection status. Next section explains PC settings.

Connecting projector with network using LAN cable, and then set it ready to

communicate with PC.

* Connecting with existing network, contact network administrator.

At last, turn on the projector. This is the end of Equipments connection.

is activated, then real time display will be started

Table of Contents

Cpx2 Cpx6