Hitachi CP-X2 - XGA LCD Projector User Manual page 12

Network functions

Hide thumbs Also See for CP-X2 - XGA LCD Projector:

Table of Contents

2. Equipment connection and network setting

2.3 Manual network connection setting – Wired LAN - (Continued)

5) When more than 2 usable network devices exist, make only one device "Valid"

that you want to use and the rest of devices "Invalid". (In this case, "Local Area

Connection" is selected.)

6) Open "Local Area Connection Properties" window you use for network device.

(Fig. 2.3.2.c)

7) Set used protocol as "TCP/IP" and open "Internet Protocol (TCP/IP) Properties"

window.

Fig. 2.3.2.d "Internet Protocol (TCP/IP) Properties" window

8) Set IP address, subnet mask and default gateway for PC.

Fig. 2.3.2.c "Local Area Connection Properties" window

Table of Contents

Cpx2 Cpx6