Hitachi CP-X2 - XGA LCD Projector User Manual page 40

2. Equipment connection and network setting
2.6 Utilize Web Remote Control (Continued)
Click "Remote Control" in this window to display Web Remote Control as shown in
Fig.2.6.b.
NOTE
• Web Remote Control does not support repeat function when it is kept
clicking.
• Since automatic repeat function is not available, click the button necessary
times to reach your demand.
• If you click the button continuously, some command will not be transferred.
Wait for a while, and Click again.
• When the [POWER] button is pushed, a message window comes up to confirm
the operation. If you wish to turn it off, push [OK], otherwise push [CANCEL].
• [PAGE DOWN] and [PAGE UP] buttons on web remote control can not be used
as mouse emulation function of the projector.
40
Fig. 2.6.b Web Remote Control
The same operation is assigned
to the bundled remote control.
The arrow keys ▲/▼/◄/►on the
remote control are shown as [UP]
/[DOWN]/[LEFT]/[RIGHT] buttons
on the web remote.
Each mode will be activated by
clicking these buttons.
• [LIVE MODE]
• [THUMBNAIL]
• [SLIDE SHOW]
• [DIRECTORY]