When Printing Becomes Faint Or Colors Are Incorrect - Canon 3747B003 User Manual

> Routine Maintenance
Contents

When Printing Becomes Faint or Colors Are Incorrect

If print results are blurred or colors are not printed correctly, the pint head nozzles are probably clogged.
Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then
clean the Print Head.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the Print Head
may improve print quality.
Important
Do not rinse or wipe the Print Head and ink tanks. This can cause trouble with the Print Head and ink
tanks.
Note
Before performing maintenance
Open the Scanning Unit (Cover) and make sure that all lamps on the ink tanks are lit red.
If not, see Checking the Ink Status
Increasing the print quality in the printer driver settings may improve the print result.
For details, refer to the on-screen manual:
When the Print Results Are Blurred or Uneven:
Step 1
See Printing the Nozzle Check Pattern
See Examining the Nozzle Check Pattern
If there are missing lines or horizontal white streaks in
Step 2
See Cleaning the Print Head
If the problem is not resolved after cleaning the Print Head
Step 3
See Cleaning the Print Head Deeply
Note
When you have performed the procedure until step 3 and the problem has not been resolved, turn
off the power and clean the Print Head deeply again after 24 hours. If the problem is still not
resolved, the Print Head may be damaged. Contact the service center.
When the Print Results Are Not Even such as the Ruled Lines
Are Misaligned:
See Aligning the Print Head
> When Printing Becomes Faint or Colors Are Incorrect
and take an appropriate action.
Advanced Guide
.
.
the pattern:
.
twice:
.
.
Advanced Guide
.
After cleaning the Print Head, print
and examine the nozzle check
pattern.
Troubleshooting