Canon 3747B003 User Manual page 97

correct position as indicated by the label on the Print Head Holder. If the position is correct but the lamp
flashes, the ink tank is empty. Replace it with a new one.
Ink lamp is off
The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink
(Push) on the ink tank until the ink tank clicks into place. If it
tank is not installed properly, press the mark
does not click into place, make sure that the orange protective cap has been removed from the bottom of
the ink tank. If the function for detecting the remaining ink level is disabled, replace the ink tank with a new
one.
.
Replacing Procedure
See
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine cannot print.
Check the error message displayed on the LCD.
Refer to " Troubleshooting" in the on-screen manual: Advanced Guide .
Page top