What Is Scangear (Scanner Driver) - Canon 3747B003 User Manual

Advanced Guide > > Scanning with Other Application Software
Scanning

What Is ScanGear (Scanner Driver)?

ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the
output size and make image corrections when scanning.
ScanGear (scanner driver) can be started from MP Navigator EX or from other applications that are
compatible with a standard interface called TWAIN. (ScanGear (scanner driver) is a TWAIN-compatible
driver.)
What You Can Do with This Software
This software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens
There are three modes: Basic Mode, Advanced Mode and Auto Scan Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
ScanGear (scanner driver) starts in the last used mode.
Settings are not retained when you switch between modes.
Basic Mode
Use Basic Mode to scan easily by following three simple on-screen steps (
Advanced Mode
Use Advanced Mode to specify color mode, output resolution, image brightness, color tone, etc. when
scanning.
> What Is ScanGear (Scanner Driver)?
,
and
).