Scanning In Basic Mode - Canon 3747B003 User Manual

Advanced Guide > > Scanning with Other Application Software
Scanning
> Scanning in Basic Mode
ScanGear (Scanner Driver)

Scanning in Basic Mode

In Basic Mode, you can scan easily by following the on-screen steps.
This section explains how to scan a single document.
See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
documents at one time.
Important
The following types of documents may not be cropped correctly. In that case, click
on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
1. Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow (alignment mark) of the Platen.
2.
Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, select Magazine(Color).
> Scanning with Advanced Settings Using
" to scan multiple
(Thumbnail)