Canon 3747B003 User Manual page 603

3.
Click Preview.
Preview image appears in the Preview area.
Note
Colors are adjusted based on the document type selected in Select Source.
4.
Set Destination.
5.
Set Output Size.
Output size options vary by the items selected in Destination.
6.
Adjust the scan area (cropping frame) as required.
Adjust the size and position of the cropping frame (scan area) on the preview image.
Adjusting Cropping Frames
7.
Set Image corrections as required.
8.
Click Scan.
Scanning starts.
Note
Click (Information) to open a dialog box in which you can check the current scan settings
(document type, etc.).
ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning
on the Scan tab of the Preferences dialog box.
Scan Tab
Related Topic
Basic Mode Tab
Page top