Adjusting Settings - Epson SureColor T3000 User Manual

Adjusting Settings

Follow the steps below to change the settings displayed.
Buttons that are used in the following settings:
1. Select an option.
To print at current settings
Press the d/u buttons to highlight Keep Settings Above and press the OK button.
Then proceed to step 6.
To change settings
Press the d/u buttons to highlight Change Settings and press the OK button.
2. Highlight a setting you wish to change and press the OK button.
3. Highlight an option and press the OK button.
4. Press the y button to return to the dialog shown in step 2.
5. When settings are complete, highlight Exit and press the OK button.
6. If On is selected for Remaining Setup, you will be prompted to enter the length of the
roll. Press the d/u buttons to choose a value between 16 and 326 feet (5.0 and 99.5 m)
and press the OK button. Paper length is set in increments of 1 foot (0.5 m).
After a short pause the printer will show Ready, indicating that it is ready to print. Transmit
the data to be printed from a computer.
Basic Operations 55