Notes On Handling Paper - Epson SureColor T3000 User Manual

The ink level and other data are stored in the IC chip, allowing cartridges to be used
O
after being removed and replaced.
To avoid getting dirt on the ink supply port, store the removed ink cartridge properly.
O
The ink supply port has a valve in it so it does not need to be capped.
Removed ink cartridges may have ink around the ink supply port, so be careful not to
O
get any ink on the surrounding area when removing the cartridges.
To maintain the quality of the print head, this printer stops printing before ink cartridges
O
are completely expended.
Although the ink cartridges may contain recycled materials, this does not affect printer
O
function or performance.
Do not dismantle or remodel ink cartridges. You may not be able to print properly.
O
Do not drop or knock it against hard objects; otherwise, the ink may leak.
O

Notes on handling paper

Note the following points when handling and storing the paper. If the paper is not in good
condition, print quality may decline.
Check the documentation supplied with each paper.
Notes on Handling
Use Epson special media under normal room conditions (temperature: 59 to 77°F [15
O
to 25°C]; humidity: 40 to 60%).
Do not fold the paper or scratch the surface of the paper.
O
Avoid touching the printable surface of the paper with your bare hands. Moisture and
O
oils from your hands can affect print quality.
Handle paper by the edges. We recommend wearing cotton gloves.
O
Changes in temperature and humidity may cause paper to become wavy or curled. Be
O
careful not to scratch or soil the paper, and flatten it before loading it in the printer.
Do not wet the paper.
O
Do not throw away the paper packaging as you can use it for storing the paper.
O
Avoid locations that are subject to direct sunlight, excessive heat, or humidity.
O
Introduction 26