Epson
SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
The illustrations show the SureColor
models, unless otherwise specified.
Note:
Availability of models varies by country.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface capable of supporting
the weights indicated below and with enough space on all sides (see illustration
below).
5.9 in. (150 mm)
23.6 in.
(600 mm)
SureColor T3475: 141 lbs (64 kg)
SureColor T5475: 167.5 lbs (76 kg)
WARNING:
The SureColor T3475 printer requires two people to lift and move it (three
people for the SureColor T5475).
Unpack and Place Printer
1
Make sure you have these items:
Printer
Printer and roll spindle
Stand
Stand (assembled)
Note:
To assemble the stand, see the instructions included with the stand
packaging.
T3475/T5475
®
T3475, but the steps are the same for all
®
5.9 in.
(150 mm)
Ink cartridges (4)
Power cord
Limited warranty
Bolts (4)
Paper basket
Basket rods
2
Remove the protective plastic from the outside of the printer.
3
If you are installing the printer on the stand, lock the front casters by
pushing the tabs down.
4
Lift and place the printer on the stand. Make sure to grip the printer as
shown in the illustrations.
SureColor T3475
SureColor T5475
5
Secure the printer to the stand using the supplied bolts.