Edirol UA-3 Owner's Manual page 68

Troubleshooting
The volume changed when you resumed from Suspend or
Hibernation status
• When Windows 2000 resumes from Suspend or Hibernation, the output volume setting
is changed due to a problem of Windows.
Start up the Mixer application as described in "Volume Control setting" (p. 56), and adjust
the USB Audio (Speaker) slider.
Problems common to software in general
Can't install
• Is the included CD-ROM inserted into the CD-ROM drive of your computer?
During installation, were the CD-ROM drive name and the installation file name input
correctly?
• Is there sufficient space on your hard disk?
Increase the free space on your hard disk. Delete unneeded files (move them to the Recycle
Bin), and then right-click on the Recycle Bin and select Empty Recycle Bin.
Alternatively, install an additional hard disk.
• Were other applications running when you performed the installation?
Exit all applications, and perform the installation again.
Can't start up an application
• Are numerous applications running?
It may be that there is not enough memory to start up another application. Close
all unneeded applications, and then start up the new application. If an error is
still displayed, try restarting your computer.
An error is displayed when you start up an application
• If multiple applications are started up simultaneously, an error message may appear.
If this occurs, click [OK], and close all unnecessary applications.
Even if an application window has been closed, the application is still running if it remains in
the taskbar. Be sure to close any unnecessary application that appears in the taskbar.
• If you are using Cakewalk, you must be sure that the sampling frequency of Cakewalk
is set to the same sampling frequency.
68