Troubleshooting; Problems Related To The Usb Driver - Edirol UA-3 Getting Started

Troubleshooting

If an unexpected problem occurs while using the UA-3D, please read this chapter
first. It provides numerous hints that will help you solve problems.
The problems covered in the troubleshooting section are organized according to
the operating system on which the problem might be encountered.
The problems covered in the troubleshooting section are organized according to
the operating system on which the problem might be encountered. Use the icon
shown at the left of the title to find the information you need.
Troubleshooting
If you are using computer for the first time, or do not understand the explanation
of a procedure, refer to the owner's manuals for your computer or for OS.
If the UA-3D does not operate as you expect, check the following points.

Problems related to the USB driver

"Add New Hardware Wizard" does not start up
automatically
"Add New Hardware Wizard" terminates before
completion
• When the USB cable is connected or disconnected, approximately 15
seconds (or more) may be required for the UA-3D to be recognized.
• Is the USB cable connected correctly?
Make sure that the UA-3D and computer are connected correctly by the USB
cable.
• Can USB be used on your computer?
Refer to the owner's manual for your computer, and make sure that it is able to
use USB.
50
Problems common to both Windows and Macintosh
Problems that occur only on Windows
Problems that occur only on Macintosh