Attaching The Usb Cable; Connecting The Usb Cable From The Tape Drive To The Server - Quantum DAT 320 CD320UE Quick Start Manual

DAT 320 Quick Start Guide
Attaching the USB
Cable
Connecting the USB
Cable from the Tape
Drive to the Server
Figure 3 Connecting to an
Internal USB Port
6
Decide Which Cable to Use
There are several options for connecting the tape drive to your server:
To an . . . Use . . .
Internal standard standard
USB port USB cable
External USB port standard
USB cable
To an Internal USB 2.0 Port
1 Use the schematic on the inside of the server panel to check whether your server has
an internal USB 2.0 port and locate its position.
2 Use the appropriate cable to connect to the server.
• A standard 5-pin USB Type B cable is provided with the tape drive (see
Notes
May be connected to the server's system board or
an internal USB card.
Cable routing kit is required.
Installing the Internal DAT 320 Tape Drive in Your Server
Figure 3).