Acoustic Noise Emissions; Class A Statements (Internal Tape Drive); Table 28 Acoustic Noise Emissions, Nominal - Quantum SDLT 600 User Manual

Acoustic Noise Emissions

Table 28 Acoustic Noise
Emissions, Nominal

Class A Statements (Internal Tape Drive)

FCC Statement
SDLT 600 Product Specification
Test Name
AC Voltage Dips and Interrupts
Immunity
Table 28 lists acoustic noise emission levels, both as noise power and
sound pressure, for the SDLT 600 tape drive. The table provides the
preliminary declared values per ISO 9296 and ISO 7779/EN27779.
Mode
Idle
Streaming
* Sound pressure level measured at front of tape drive.
This equipment has been tested and found to comply with the limits for a
6
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
Noise Power Emission
Level (LNPEc)
Internal Tabletop
Not 5.4 Bel
applicable
5.9 Bel 5.9 Bel
Chapter 6 Regulatory Compliance
Acoustic Noise Emissions
Test Required
Specification Performance
EN61000-4-11 Criteria B
Sound Pressure Level
(LPAc)*
Internal Tabletop
Not 42 dB
applicable
47 dB 53 dB
6
6
45