Table of Contents
Advertisement
www.gateway.com
Replacing the I/O board
Tips & Tricks
You need a Phillips screwdriver to replace
the I/O board.
Place the heat sink on the system board, then tighten the screws that
8
secure it to the system board.
Replace the fan cover.
9
Return your computer to its upright position.
10
Replace the side panel by following the instructions in
11
panel" on page
15.
To replace the front I/O board:
Remove the side panel by following the instructions in
1
panel" on page
12.
Remove the front bezel by following the instructions in
2
front bezel" on page
Remove the screw that secures the front I/O assembly to the computer,
3
then remove the I/O assembly.
14.
Screw
Replacing the I/O board
"Replacing the side
"Removing the side
"Removing the
29
Advertisement
Table of Contents
