Table of Contents
Advertisement
www.gateway.com
Replacing the front fan
Note any jumper settings on the old drive and set the jumper on the new
7
drive to be the same. If you are installing a new drive, follow the
manufacturer's instructions.
Slide the new drive into the drive bay, then secure it in the drive bay by
8
sliding the drive release latch in toward the computer.
If you are replacing a drive, reconnect the drive cables using your notes
9
from
Step
4. If you are installing a new drive, follow the manufacturer's
instructions.
Replace the side panel by following the instructions in
10
panel" on page
15.
Reconnect all external cables and the power cord.
11
Turn on your computer.
12
If you installed a new drive, format and partition the drive according to
13
the manufacturer's instructions (available on the manufacturer's Website).
If Windows does not start, install Windows using the operating system CD
14
that came with your computer, then install the drivers and applications
using the drivers and applications disc that you created. Follow the
instructions in the restore chapter of the User Guide that you printed to
reinstall the drivers and programs.
To replace the front fan:
Remove the side panel by following the instructions in
1
panel" on page
12.
Replacing the front fan
Jumper
"Replacing the side
"Removing the side
23
Advertisement
Table of Contents
