Correcting The Focus - Eiki LC-W4 Owner's Instruction Manual

Eiki international owner's instruction manual multimedia projector lc-w4

Hide thumbs

Table Of Contents

Table of Contents

When the lens is attached to the projector and images are being projected on the screen, the

peripheral focus may be out of focus in some localized areas. If this happens, insert the accessory

in between the lens attachment and the lens to correct the focus.

Inserting the spacers corrects the distance for the best

diagonal focus at the screen.

The corrected distance is determined by the thickness

of the spacers that are used. As a guide, the distance

is adjusted by approximately 30 mm for each 0.1 mm

thickness of the spacers.

There are three types of spacers provided, and there

are four of each spacer type. Use these spacers to

correct the distance as required.

Spacer "1"

Color: Clear

Thickness: 0.1 mm

Spacer "2"

Color: Black

Thickness: 0.2 mm

Spacer "1"

Color: Cream

Thickness: 0.3 mm

BE SURE TO CHECK FOR SAFETY

After installing or replacing the lens, be sure to check the following for safety.

1. Check if the lens is securely fixed with the screws.

2. Check if no wiring is damaged or tangled on the gear of the lens motor

or the other mechanical parts.

3. Check if no part is missing and no mounting part is loose.

Some parts are not used for installation or replacement. Keep these parts for later use.

NOTE: Figures in this manual may differ from the actual product.