Table of Contents
Advertisement
BEFORE OPERATION
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P33)
SELECT BUTTON
Used to execute the
selected item, or to
expand
or
compress
image in DIGITAL ZOOM
+/- mode. (P33)
MENU BUTTON
Used to select MENU
operation. (P19, 20)
P-TIMER BUTTON
Used to operate P-
TIMER function. (P23)
ZOOM BUTTON
Used to adjust zoom. (P22)
Remove battery
1
compartment lid.
Press lid down-
ward and slide it.
To insure safe operation, please observe following precautions :
● Use (2) AA or R06 type alkaline batteries.
● Replace two batteries at same time.
● Do not use a new battery with an used battery.
● Avoid contact with water or liquid.
● Do not expose Remote Control Unit to moisture, or heat.
● Do not drop Remote Control Unit.
● If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.
● Danger of explosion if battery is incorrectly replaced.
● Dispose of used batteries according to batteries manufacturers instructions and local rules.
18
AUTO PC ON-OFF
D.ZOOM
FREEZE
NO SHOW
MUTE
IMAGE
VOLUME-
SELECT
VOLUME+
MENU
KEYSTONE
LASER
P-TIMER
INPUT 1
INPUT 1
ZOOM
INPUT 2
INPUT 2
INPUT 3
INPUT 3
FOCUS LENS
REMOTE CONTROL BATTERIES INSTALLATION
Slide batteries into
2
compartment.
NO SHOW BUTTON
Operating Range
Used to turn picture into
black image. (P23)
Point Remote Control Unit toward
projector (Infrared Receiver Window)
whenever pressing any button.
Maximum operating range for
Remote Control Unit is about 16.4'
FREEZE BUTTON
(5m) and 60° in front and rear of a
Used to freeze picture. (P23)
projector.
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust value in ON-SCREEN
MENU. They are also used
to pan image in DIGITAL
ZOOM +/- mode. (P33)
POINT LEFT/RIGHT buttons
are also used as VOLUME
+/- buttons. (P24)
INPUT 1 BUTTON
Used to select input
source (INPUT 1).
(P25)
INPUT 2 BUTTON
Used to select input
source (INPUT 2).
(P25, 34)
INPUT 3 BUTTON
Used to select input
16.4'
source (INPUT 3).
(5 m)
(P34)
Two AA size batteries
For correct polarity (+ and
–),
be
sure
battery
terminals are in contact
with pins in compartment.
60°
16.4'
(5 m)
60°
Replace compartment lid.
3
Advertisement
Table of Contents
