Eiki LC-W4 Owner's Instruction Manual page 58

LENS REPLACEMENT AND INSTALLATION PROCEDURE
NOTE: The installation procedure and needed
parts for lens installation depend on the type of
the Projection Lens. Check the Model No. of
the Projection Lens and be sure to install or
replace the lens following the procedure below.
1
Remove the Lower Lens Cover. Remove the two
(2) Screws A. Push the part B and pull the Lower
Lens Cover down. (See Fig. 1.)
2
Remove the four (4) Screws C. Pull the Upper
Lens Cover toward the front and remove.
(See Fig. 2.)
E
3 Remove the two (2) Screws D and the Cover
Plate on the back of the Upper Lens Cover.
(See Fig. 3.)
A
UPPER LENS
COVER
COVER PLATE
- 2 -
B
LOWER LENS
COVER
C
C
UPPER LENS
COVER
D
Fig-1
Fig-2
Fig-3