Preparation; Setting-Up Projector; Connecting Ac Power Cord - Eiki LC-VC1 Owner's Manual

PREPARATION

CONNECTING AC POWER CORD

This projector uses nominal input voltages of 100-120 V or 200-
240 V AC. The projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure of the type of power supply being in use.
Connect projector with the peripheral equipment before
turning
11 13 for
connection.)
projector on. (Refer to pages
—