Selecting Input Source - Eiki LC-VC1 Owner's Manual

DIRECT OPERATION
Choose either Input 2 or Input
Control or on the Remote Control Unit.
If projector cannot reproduce proper video source, select correct input
source through MENU OPERATION (see below).
MENU OPERATION
1
and ON-SCREEN MENU will appear. Press
Press MENU button
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to
either Input 2 or Input 3 that you want to choose and then press
SELECT button. Source Select Menu appear.
3
Move the pointer to the source that you want to select and then
press SELECT button.
3 by pressing INPUT button on the Top