Table of Contents
Advertisement
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
Adjustable Feet. Projection angle can be adjusted to 9.0 degrees.
1
Lift the front of projector and pull Feet Lock Latches on
both sides of projector.
2
Release Feet Lock Latches to lock Adjustable Feet and
rotate Adjustable Feet to fine tune position and tilt.
3
To shorten Adjustable Feet,
pull and undo Feet Lock Latches.
Position and keystone distortion of the image can be
adjusted using Menu Operation. (Refer to P 21 and 36.)
MOVING PROJECTOR
Use Carry Handle when moving projector. When moving projector, replace
Lens Cover and retract Adjustable Feet to prevent damage to Projection Lens
and cabinet. When this projector is not in use for an extended period, put it into
the case (Dust Cover) supplied with this projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
•
Do not bump projector, otherwise damages or malfunctions may result
•
When carrying projector, use a suitable carrying case
• Do not transport projector by using a courier or transport service in an unsuitable transport case. This may cause damage to projector.
To transport projector through a courier or transport service, consult your dealer for best way.
the front of projector and
lift
Advertisement
Table of Contents
