Selecting Video System - Eiki LC-VC1 Owner's Manual

1
Press MENU button and ON-SCREEN MENU will appear. Press
LEFT/RIGHT buttons to move a red frame pointer to
POINT
SYSTEM Menu icon.
2
DOWN button to move a red arrow pointer to the
Press POINT
system that you want to select and then press SELECT button.
VIDEO JACK, YIC JACKS OR S-VIDEO JACK
Projector automatically detects incoming Video system,
and adjusts
itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
If projector cannot reproduce proper video image, it is necessary to
specific broadcast signal format among PAL, SECAM, NTSC, NTSC
4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr JACKS
Projector automatically detects incoming Video signal, and
adjusts
itself to optimize its performance.
image, it is necessary to select a specific component video signal format among
480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
select a
If projector cannot
reproduce proper video