Table of Contents
Advertisement
Before calling your dealer or service center for assistance, check the matters below once again.
Make sure you have connected projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages
1.
11 13.
2. Check cable connection
. Verify that all computer, video
3. Verify that all power is switched on.
If projector still does not produce an image, re-start the computer.
4.
5. If the image sill does not appear, unplug projector from the computer and check the computer monitor's
your graphics controller rather than with projector. (When you reconnect
power up projector. Power the equipment back on in order of projector and computer.)
If the problem still exists, check the following chart.
6.
and
power cords are properly connected.
projector, remember to turn the computer and monitor off before you
display. The problem may be with
Advertisement
Table of Contents
